The Study of the Effect of Surfactants on Copper Codeposition with SiC Nano Particulate from Deep Eutectic Solvent Ionic Liquids (Ethaline)

K. El Ttaib *

Department of Chemistry, Faculty of Science, University of Benghazi, Libya.

A. Benhmid

Department of Chemistry, Faculty of Science, University of Benghazi, Libya.

*Author to whom correspondence should be addressed.


Abstract

Here we investigate the electrolytic deposition of copper and copper nano composites in the absence and the presence of two types of surfactants: cationic which is sodium dodecyl sulphate (SDS)  and the other type is cetyl  trimethyl ammonium bromide (CTAB) from a solution of the metal chloride salt in ethylene glycol–choline chloride based eutectics. The SEM images and EDAX analysis allow in situ quantification or particulate inclusion. It is quite interesting to perceive that the composition of composite material was strongly dependent on the amount of species suspended in solution. Again the data here has revealed that the majority of material was dragged onto the surface rather than settling on to it. The distribution of the composite material was found to be even throughout the coating. This technology is important because it facilitates deposition of bright copper coatings without co-ligands such as cyanide which is not friendly environment.

Keywords: Copper, nanocomposites, choline chloride, SEM, EDAX


How to Cite

Ttaib, K. E., & Benhmid, A. (2024). The Study of the Effect of Surfactants on Copper Codeposition with SiC Nano Particulate from Deep Eutectic Solvent Ionic Liquids (Ethaline). International Research Journal of Pure and Applied Chemistry, 25(1), 22–27. https://doi.org/10.9734/irjpac/2024/v25i1842

Downloads

Download data is not yet available.

References

Sidky PS, Hocking MG. Development of protective coating for XB8CrNiMoVNb16-13 alloy Br. Corros. J. 1999;32:171.

Wan YZ, Wang YL, Tao HM, Cheng GX, Dong H. Effect of Various Organic Additives in Galvanic Trans. Inst. Met. Finish. 1999;77:52.

Wang YL, Wan YZ, Zhao SM, HM. Tao XH. Structural, micromechanical and tribological analyses dong surf. Coat. Technol. 1998;106:162.

Shawki S, ZA. Hamid. The surfactant addition effect in the elaboration of ... Anti-Corros. Methods Mater. 1997;44:178.

Sun KN, Hu XN, Zhang JH, Wang JR, Effect of heat treatment on microstructure Wear.1996;196:295.

Zhang YZ, Wu YY, Sun KN, Yao M. stably under iodide invasion in efficient perovskite J. Mater. Sci. Lett. 1998;17:119.

Straffelini G, Colombo D, Molinari A, Surface durability of electroless Ni–P composite deposits Wear.1999;236:179.

GNK. Ramesh Bapu, Electrocodeposition and characterization of nickel-titanium carbide composites Surf. Coat. Technol. 1994;67:105.

Tomaszewski TW, Electrodeposited gold composite coatings Trans. Inst. Met. Finish. 1976;54:45

Sonnenwald PJ, Visscher W, Barendreht Electrodeposition of Ni–SiC nano-composite coatings E, Appl J. Electrochem. 1990;20:563.

Buelens C, Celis JP, Roos JR, Electrochemical aspects of the codeposition of gold J. Appl. Electrochem. 1983;13:541.

Guglielmi N, Kinetics of the Deposition of Inert Particles Electrochem J. Soc. 1972;119:1009.

Celis JP, Roos JR, Electrochemical aspects of the codeposition of gold Electrochem J. Soc. 1977;124:1508.

Celis JP, Roos JR, Buelens C, A Mathematical Model for the Electrolytic Codeposition J. Electrochem. Soc. 1987;134:1402.

Stankovic VD, Gojo M, Electrodeposited composite coatings of copper Surf. Coat. Technol. 1996;81:225.

F. Endres: Ionic Liquids: Solvents for the Electrodeposition of Metals Chem. Phys. Chem. 2002;3:144.

Abbott AP, McKenzie KJ: Application of ionic liquids to the electrodeposition of metals Phys. Chem. Chem. Phys. 2006;8:4265.

Ohno H. (ed.): Electrochemical aspects of ionic liquids. New York, John Wiley and Sons; 2005.

Endres F, Phys Z. Electrochemical co-deposition of Tin+ phases with gold Chem. 2004;218:255.

Endres F, Zein S. El Abedin: Air and water stable ionic liquids in physical chemistry Phys. Chem. Chem. Phys. 2006;8: 2101.

Endres F, Abbott AP, Mac Farlane DR. Electrodeposition of metals using ionic liquids’. Weinheim, Wiley -VCH.

Abbott AP, Ttaib KEl, Frisch G, McKenzie KJ, Ryder KS, Electrodeposition of copper composites from deep eutectic Phys. Chem. Chem. Phys. 2009;11:4269.

Andricacos PC, Uzoh C, Dukovic JO, Horkans J, Deligianni H. Electrochemical Microfabrication, 1998;42:5

Andricacos PC. Interface. 1998; 7:23.

The Canning handbook Surface Finishing Technology”, W. Canning plc, in association with E. & F.N. Spoon Ltd., London – New York; 1989.

El Ttaib, Khalid. The electrodeposition of composite materials using deep eutectic solvents. University of Leicester. Thesis; 2011. Available:https://hdl.handle.net/2381/9505

El Ttaib K. The electrodeposition of composite materials using deep eutectic solvents Thesis; 2011.